Star Wars Legion Terrain - Modular Watchtower and Walkways

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2882251.

This set of models is a modular walkway and tower system for Star Wars Legion, and other sci-fi wargames. It's scaled to 32mm currently. I designed it to be customizable in lots of different ways for whatever your wargame needs. You should be able to get quite a few different layouts and set ups with these parts.

TOWER COMPONENTS The towers come in 3 sections, with two flavors. With Ladder, or No Ladder. The top of each has 4 slots to attach walkways, and four pegs to line up the next tower piece. Pieces

• Base. for the bottom of the tower.
• Center. a simple workhorse piece. Print more than one to make your towers taller.
• Top. this has outward flanges to indicate the top of the tower.

TOWER TOPS/CAPS/PLATFORMS There are number of small platforms and caps to top off the top unit depending on your taste. There is also a Watchtower Lookout platform that has enough room for a whole squad, and a roof that sits on top.

WALKWAYS These come in two different styles, in both 100mm and 150mm lengths.

IMPORTANT!! The key end of the walkway should fit snugly in the slot, so I have provided two different sizes.
A - Snug Fit B - Looser Fit

Print a small test piece first before printing your walkways. I have provided the model Small Platform in both A and B to test out. This way you don't waste a lot of filament, and the platform that fits can be used in your set up.

The walkway should fit into the slot snugly and be flush with the top. this allows the tower pieces to stack nicely and allow for more walkways to be added in other directions.

UPDATE 5/2/18 - Added a version of Base, Center and Top with Ladder that has openings for Magnets on the top. I used D41 1/4" dia. x 1/16" thick from K&J Magnetics for this. The bottom of the center and top models has a space to insert a metal thumbtack (.39" or 10mm heads) you can find in most office supply stores or at work). You can find them under the name: "Imperial Watchtower center module magnet ladder" in the files section.

UPDATE: 5/7/18 - added a version of the larger platform with barricades on four sides for cover.

UPDATE: 5/11/18 - By request I modified a module to allow putting a Comm Tower and Dish on the assembly. I included two versions of the center block with Comm tower, ad one where you can simply mount the whole model with the standard four pegs. Also included is the Comm Dish, which is the same as my other model just for convenience.

If you'd like to purchase a print of this, you can check here are FunBoardGames on Etsy who is the only authorized vendor of these printed models. https://www.etsy.com/shop/FunBoardGames

Check my other models for Star Wars Legion here: https://www.thingiverse.com/thing:2829886 Tatooine Hut https://www.thingiverse.com/thing:2839127 Tatooine Dwellings https://www.thingiverse.com/thing:2828193 Crates, Barrels and Barricades https://www.thingiverse.com/thing:2822966 Desert Fence/Wall https://www.thingiverse.com/thing:2856961 Moisture Vaporator https://www.thingiverse.com/thing:2857993 Communications Tower https://www.thingiverse.com/thing:2859235 Power Generators https://www.thingiverse.com/thing:2875831 Imperial Bunkers https://www.thingiverse.com/thing:2894409 Fuel/Chemical Tanks https://www.thingiverse.com/thing:2882251 Modular Watchtower and Walkways https://www.thingiverse.com/thing:2902272 Imperial Endor Bunkers https://www.thingiverse.com/thing:2908164 Cargo Pods https://www.thingiverse.com/thing:2909813 Modular Trench System